48
Changing items in the SET
UP screen
a Set the mode dial to SET UP.
The SET UP screen appears.
b Select the setting item you
want to change by moving the
multi-selector to v/V/b/B.
The frame of the item you select turns
yellow.
c Press the center of the multi-
selector to enter the setting.
To turn off the SET UP screen
display
Set the mode dial to any position other than
SET UP.
• For details on the SET UP items, see page 140.
How to use the command
dial
There are two methods for operating the
command dial. One is using only the
command dial and the other is using the
command dial in combination with other
buttons. This section describes the method
used when operating the commnad dial in
combination with other buttons.
This method is used for the following
functions.
• Manual exposure (page 57)
• Metering mode (page 58)
• Exposure adjustment (page 59)
• Exposure Bracket (page 63)
• Flash mode (page 68)
• White balance (page 73)
•Burst (page75)
• Multi Burst (page 76)
• Nightshot/Nightframing (page 77)
a Set the mode dial to P, S, A, M,
SCN or .
b Press and hold the button you
want to operate and turn the
command dial.
The value or setting that is indicated
on the screen is entered.
c Release the button.
The indicators disappears from the
screen.
SELECT
Camera 1
AF Mode:
Digital Zoom:
Date/Time:
Red Eye Reduction
:
Hologram AF:
Monitor
Precision
Off
Off
Auto Review: Off
Auto
Cancel
OK
Setup 2
File Number:
USB Connect:
Video Out:
Clock Set:
/BRK
Command dial
NIGHTSHOT/NIGHTFRAMING
WB
Mode dial
To Next Page
Loading...
Need help?
General
