Appendixes
Appendixes A-63
To Exchange the Button Labels
23
After changing a pattern assignment, you can exchange the label on the
numeric buttons.
Proceed as follows.
1 Write the new pattern on one of the supplied exchange labels.
2 Insert the supplied tool into the hole at the side of the button and
remove the button.
3 Insert the tool into the slot on the side of button, lifting up the white
button cap, and remove the cap.
4 Remove the old label and insert the new label.
5 Replace the white button cap.
6 Return the button to its original position.
To Next Page
Loading...
Need help?
General
