192
Selecting the mode setting of each item z is the default setting.
Menu items differ depending on the position of the POWER switch.
The screen shows only the items you can operate at the moment.
Icon/item
MANUAL SET
PROGRAM AE
P EFFECT
RED EYE R
FLASH LVL
WHT BAL
AUTO SHTR
Mode
——
——
z OFF
ON
HIGH
z NORMAL
LOW
——
z ON
OFF
Meaning
To suit your specific shooting requirement (p. 64)
To add special effects like those in movies or on
the TV to images (p. 60, 76)
Red-eye reduction does not function
Preliminary flash before recording prevents red-
eye
To make the flash level higher than normal
To use the normal setting
To make the flash level lower than normal
To adjust the white balance (p. 53)
To automatically activate the electronic shutter
when shooting in bright conditions
Not to activate the electronic shutter even when
shooting in bright conditions
POWER
switch
Note on RED EYE R and FLASH LVL
You cannot adjust RED EYE R and FLASH LVL if the external flash (optional) is not
compatible.
Note on the electronic shutter
The electronic shutter is the function of adjusting the shutter speed electronically.
Changing the menu settings
To return to FN
Press EXIT.
Menu items are displayed as the following icons:
MANUAL SET
CAMERA SET
VCR SET
LCD/VF SET
MEM SET 1
MEM SET 2
CM SET
TAPE SET
SETUP MENU
OTHERS
To Next Page
Loading...
Need help?
General