43
Playback
– Basics
DISPLAY/BATT INFO
DISPLAY
To return to FN
Press EXIT.
To stop playback
Press .
To rewind the tape
Press during playback stop.
To fastforward the tape
Press during playback stop.
To view a still image (playback pause)
Press during playback. To resume playback, press again. If the playback
pause lasts more than 5 minutes, the camcorder automatically stops.
If you leave the power on for a long time
Your camcorder gets warm. This is not a malfunction.
To display the screen indicators – Display function
Press DISPLAY/BATT INFO on your camcorder, or DISPLAY on the Remote
Commander supplied with your camcorder.
The indicators disappear from the screen.
To make the indicators reappear, press DISPLAY/BATT INFO or DISPLAY on the
Remote Commander again.
Playing back a tape
To Next Page
Loading...
Need help?
General