67
Advanced Recording Operations
This function adjusts the exposure to the brightness of the point you want to focus on.
Use Flexible Spot Meter in the following cases:
– The subject is backlit.
– When there is strong contrast between the subject and background such as with a
subject that is on stage and lit by a spotlight.
The POWER switch should be set to or .
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press SPOT METER. The SPOT METER screen appears.
(3) Press the desired area in the frame.
The SPOT METER indicator flashes on the screen. The exposure is adjusted to
the brightness of the point you selected.
(4) Press
OK to return to PAGE1. The EXPOSURE setting changes to the
manual mode (p. 66).
To return to FN
Press EXIT.
To return to the automatic exposure
Press AUTO on the SPOT METER screen to return to PAGE1.
Note
The following functions do not work during Flexible Spot Meter:
– Back light function
– Color Slow Shutter
– Spot Focus
Using spot light-metering function
– Flexible Spot Meter
2
SPOT
METER
OK
AUTO
SPOT METER
To Next Page
Loading...
Need help?
General