52
Recording still images on a “Memory Stick” during recording
standby
The POWER switch should be set to .
Operate by touching the panel.
(1) Follow steps 1 to 3 in “Recording moving pictures on a tape” (p. 51).
(2) Press PHOTO deeply.
The self-timer starts counting down from about 10 seconds with a beep. In the
last 2 seconds, the beep gets faster, and then your camcorder records still
images automatically.
To stop the countdown for recording on a tape
Press START/STOP. To restart the countdown, press START/STOP again.
To cancel the self-timer
During standby, press SELFTIMER on the LCD screen to make the (self-timer)
indicator disappear from the screen. You cannot cancel the self-timer using the Remote
Commander.
Notes
•When self-timer recording is finished, the self-timer is automatically canceled.
•You can record with the self-timer only during recording standby.
When the POWER switch is set to MEMORY
You can also record still images on a “Memory Stick” with the self-timer (p. 135).
Self-timer recording
To Next Page
Loading...
Need help?
General