99
Editing
REC
PAUSE
REC CTRL
RET.
REC
START
Dubbing
Before operation
Set DISPLAY in to LCD in the menu settings when using the A/V connecting cable.
(The default setting is LCD.)
The POWER switch should be set to .
Operate by touching the panel.
(1) Insert a blank tape (or a tape you want to record over) into your camcorder. If
you are recording a tape from the VCR, insert the recorded tape into the VCR.
(2) Press FN and select PAGE3.
(3) Press REC CTRL.
(4) Press REC PAUSE.
(5) Press N on the VCR to start playback if you record a tape from a VCR. Select
a TV program if you record from a TV. The picture from playback side appears
on the LCD screen or in the viewfinder.
(6) Press REC START at the scene where you want to start recording from.
To finish dubbing
Press on your camcorder, then press the stop button on the VCR.
Recording video or TV programs
To Next Page
Loading...
Need help?
General