1-3. Flexible Card Wire
1-3-1. Connecting and Disconnecting Flexible Card Wires
Note
• Be very careful not to fold flexible card wires. Life of flexible card wire will be significantly shortened if it is folded.
• Each flexible card wire has conductive side and insulated side. If the flexible card wire is connected in the wrong
orientation of the conductive side and the insulated side, the circuit will not function.
• Insert the flexible card wire straight.
• Check that the conductive side of the flexible card wire is not contaminated.
A
Isolation
surface
(Type E)
A
Isolation
surface
(Type F)
Disconnecting
1. Slide or lift up the portion A in the direction of the arrow to unlock and pull out the flexible card wire.
Connecting
1. Slide or lift up the portion A in the direction of the arrow and securely insert the flexible card wire into the deep
end of the connector.
2. Return the portion A to its original position and lock the connector.
1-3-2. Connecting and Disconnecting Flexible Card Wires with Connector
Note
• Be very careful not to fold flexible card wires. Life of flexible card wire will be significantly shortened if it is folded.
• Check that the conductive side of the flexible card wire is not contaminated.
Disconnection
1. Disconnect the flexible card wire while pushing both ends of the connector inside.
HXCU-TX70
1-3
To Next Page
Loading...
Need help?
General
