4-10. CN-3664 Board
Preparation
1. Remove the top cover. (Refer to “4-2. Top Cover”)
2. Remove the front assembly. (Refer to “4-3. Front Assembly”)
3. Remove the AU-358 board. (Refer to “4-9. AU-358 Board”)
Procedure
1. Disconnect the harness from the connector (CN002) on the CN-3664 board.
2. Remove the two screws (PSW3 x 6) to detach the income plate and the CN-3664 board.
3. Remove the two screws (BVTP3 x 12) to detach the CN-3664 board.
PSW
3 x 6
CN-3664 board
CN002
Harness
Income plate
BVTP
3 x 12
4. Install the removed parts by reversing the steps of removal.
HXCU-TX70
4-14
To Next Page
Loading...
Need help?
General
