4-5. DM-152 Board
Preparation
1. Remove the top cover. (Refer to “4-2. Top Cover”)
2. Remove the ENC-112 board. (Refer to “4-4. ENC-112 Board”)
Procedure
1. Disconnect the harness from the connector (CN101) on the DM-152 board.
2. Disconnect the two flexible flat cables from the two connectors (CN202, CN203) on the DM-152 board.
3. Disconnect the flexible board from the connector (CN201) on the DM-152 board.
HXCU-TX70
4-6