86
Tiny spots in white, red, blue, or green appear on the LCD screen.
• This phenomenon appears when using a slow shutter speed (p. 35). This is not a malfunction.
The subjects passing by the frame very fast appear crooked.
• This is called the focal plane phenomenon. This is not a malfunction. Because of the way that
the image device (CMOS sensor) reads out image signals, the subjects passing by the frame
rapidly might appear crooked depending on the recording conditions.
Horizontal stripes appear on the image.
• This occurs when recording pictures under a fluorescent lamp, sodium lamp, or mercury
lamp. This is not a malfunction. This can be improved by changing the shutter speed (p. 35).
Black bands appear when you record a TV screen or computer screen.
• This can be improved by adjusting the shutter speed (p. 35).
The time code is not recorded in sequence.
• The time code may not be recorded sequentially if you change the settings of [REC
FORMAT].
Refer also to the “Internal memory/Memory card” section (p. 84).
The desired images cannot be found.
Images cannot be played back.
• Select the recording media and image quality of the image you want to play back on the
thumbnail screen (p. 48).
• Image data cannot be played back if you have modified file names or folders, or have edited
the data on a computer. This is not a malfunction.
• Images recorded on other devices may not be played back, or displayed in incorrect size. This
is not a malfunction.
• Display the thumbnail screen, select the thumbnail with V/v/B/b buttons and press the SET
button (p. 49).
The data file name is displayed incorrectly, or flashing.
• The file is damaged.
• The file format is not supported on your camcorder (p. 96).
• Only the file name is displayed, if the folder structure does not conform to the universal
standard.
No sound or only a low sound is heard.
• Turn up the volume (p. 50).
Playback
Troubleshooting (Continued)
To Next Page
Loading...
Need help?
General