19
Getting Started
Step 3: Turning on the camcorder and setting
the date and time
Slide the ON/STANDBY switch to ?
(ON) while pressing the green
button.
When you use your camcorder for the first
time, the [CLOCK SET] screen appears.
To turn off the power
Slide the ON/STANDBY switch to 1
(STANDBY).
b Notes
• If warning messages appear on the LCD screen,
follow the instructions.
Set the date and time when you use your
camcorder for the first time.
z Tips
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the rechargeable battery and then set the
date and time again. See “Charging the pre-
installed rechargeable battery” (p. 101).
When you set the date and time again, press
the MENU button, and select
(OTHERS) t [CLOCK SET].
1 Select your area by pressing the
V/v/B/b button, then press the
SET button.
Turning on the camcorder
Setting the date and time
LCD screen
Continued ,
To Next Page
Loading...
Need help?
General