73
Using Network Functions
Using the streaming function (STREAMING)
You can connect the camcorder to a
network and stream a movie in real-time to
external devices.
There are limitations on the size of the
original file movie and the streaming
movie.
For details, see “Streaming supported
formats” (p. 128).
You configure streaming settings and
register them using PRESET beforehand to
distribute a stream using those settings.
The following items can be configured.
SIZE
Select the image size for streaming.
– 1280×720
– 640×360
z Tip
• Select a size of “640×360” for increased
streaming distribution stability.
DESTINATION SET
Configure the streaming distribution
destination.
– Host Name: IP address or host name of
the receiver
– Port: Port number used for streaming on
the receiver
1 Press the MENU button.
2 Select (NETWORK SET) t
[STREAMING] t desired
PRESET number t configuration
item.
3 Select/set the setting value.
4 Press the MENU button to return
to the shooting screen.
You can distribute a stream of the movie,
while shooting, using the connected
network.
1 Check that the network
connection settings are
successful (p. 68).
2 Press the MENU button.
3 Select (NETWORK SET) t
[STREAMING] t [EXECUTE] t
network connection method.
• The network connection starts.
• To cancel streaming, press the MENU
button or press the ASSIGN button
assigned with the [STREAMING]
function, or select .
• When connection is successful,
appears on the screen and the
camcorder is ready to start streaming.
Streaming formats
Configuring streaming (preset
registration)
Streaming distribution
Continued ,
To Next Page
Loading...
Need help?
General
Weight and Dimensions
