44
Using Direct Menu
Direct Menu allows you to change menu
settings using single-hand operation.
The following settings can be changed
using Direct Menu.
• Focus value (p. 35)
• AE shift level value (p. 88)
• Iris value (p. 39)
• Gain (p. 40)
• Shutter speed value (p. 40)
• White balance value (p. 42)
1 Press the ASSIGN7/Fn button A.
By default, the Direct Menu function is
assigned to the ASSIGN7/Fn button A,
but it can also be assigned to other
buttons.
After entering Direct Menu mode, a
cursor (underline) is displayed for items
along the bottom of the LCD screen.
• Orange cursor indicates the selected
item.
• White cursor indicates selectable
items.
For example, the iris value 3 is
selected in the following diagram.
A Focus value
B AE shift level value
C Iris value
D Gain
E Shutter speed value
F White balance value
2 Move the multi-selector B left/
right to move the orange cursor
to select the target item to set.
3 When (auto) appears for the
item to set, moving the multi-
selector up/down clears the
mark.
4 Press the multi-selector B to
select the setting.
The set value is highlighted in reverse
black and white, allowing you to change
the value.
The following diagram shows an
example of changing the shutter speed
value.
Orange cursor
Shutter speed value
To Next Page
Loading...
Need help?
General
Weight and Dimensions
