77
Using Network Functions
1 Stop streaming.
2 Press one of the following.
• MENU button
• ASSIGN button assigned with the
USTREAM start/stop function
USTREAM stops.
Stopping USTREAM
Using the FTP transfer
function
When the camcorder is connected to a
network, you can transfer recorded movie
files directly to an FTP server.
An FTP server must be registered in order
to use FTP transfer. Up to three servers can
be registered. This section describes the
registration of FTP SERVER1 as an
example.
1 Press the MENU button.
2 Select (NETWORK SET) t
[FTP TRANSFER] t [FTP
SERVER1].
The FTP SERVER1 setup screen
appears.
3 Select the item name of each
setting, and enter the settings for
FTP SERVER1.
Enter using the keyboard, then select
[OK].
z Tip
• For details about the keyboard input method, see
page 71.
DISPLAY NAME
Enter the display name of the FTP server
to register.
DESTINATION SET
• Host Name: Host name or IP address
of the server
• Secure Protocol: Enable/disable
secure FTP transfer
• Port: Port number of the FTP server
• Directory: Transfer destination
directory
USER INFO SET
User name and password
Registering an FTP server
Continued ,
To Next Page
Loading...
Need help?
General
Weight and Dimensions
