To Next Page

To Previous Page

Help Guide

Interchangeable Lens Digital Camera

ILME-FX30

Tracking subject (Tracking function)

This camera has the function of tracking which tracks the subject, and keeps marking it with the focusing frame.

You can set the start position to track by selecting from focusing areas, or by specifying by touch operation. The required

function varies depending on the setting method.

You can refer to the related functions under “Related Topic” at the bottom of this page.

Setting the start position to track by focusing area ([Tracking] under [

Focus Area])

The selected focusing frame is set as the start position to track, and the tracking starts by pressing the shutter button

halfway down.

This function is available in still image shooting mode.

This function is available when [

Focus Mode] is set to [Continuous AF].

Setting the start position to track by touch operation ([Touch Tracking] under [Touch Func. in

Shooting])

You can set the subject to track by touching it on the monitor.

This function is available in still image shooting mode and movie shooting mode.

This function is available when [

Focus Mode] is set to [Single-shot AF], [Automatic AF], [Continuous AF], or

[DMF].

Changing the setting for [

Focus Area] to [Tracking] temporarily ([Tracking On] by Custom Key)

Even [

Focus Area] is set to other than [Tracking], you can temporarily change the setting for [ Focus Area] to

[Tracking] while pressing and holding the key to which you have assigned [Tracking On] function.

Assign the [Tracking On] function to a desired key using [

Custom Key/Dial Set.] in advance.

This function is available in still image shooting mode.

This function is available when [

Focus Mode] is set to [Continuous AF].

Sony ILME-FX30 User Manual

Questions and Answers: