Help Guide
Interchangeable Lens Digital Camera
ILME-FX30
Lock Operation Parts
You can set whether the multi-selector, dials, and wheel can be locked by pressing and holding down the Fn (Function)
button.
Menu item details
Off:
Does not lock the multi-selector, front dial, rear dial, or control wheel even if you press and hold down the Fn (Function)
button.
Multi-Selector Only:
Locks the multi-selector.
Dial + Wheel:
Locks the front dial, rear dial, and control wheel.
All:
Locks the multi-selector, front dial, rear dial, and control wheel.
Hint
You can release the lock by holding the Fn (Function) button down again.
You can lock all buttons, dials, and wheels except the shutter button by pressing and holding the MENU button and the Fn
(Function) button simultaneously for 5 seconds. Press and hold the MENU button and the Fn button simultaneously for 5 seconds
again to release the lock.
Note
If you set [AF Area Registration] to [On], [Lock Operation Parts] will be fixed to [Off].
Related Topic
Registering the current focus area (AF Area Registration)
5-043-036-11(1)
Copyright 2022 Sony Corporation
MENU → (Setup) → [Dial Customize] → [Lock Operation Parts] → desired setting.
To lock the operating parts, hold down the Fn (Function) button until the message “Locked.” appears on the
monitor.
1
To Next Page
Loading...
Need help?
General
