In the following example, the functions listed below are registered to "My Dial," and [My Dial 1→2→3] is assigned to the
1 button (Custom button 1).
Note
“My Dial” settings in which every dial/wheel is set to [Not set] are not recalled when you press the custom key. They are also
skipped in [My Dial 1→2→3].
Even if a dial/wheel has been locked using the [Lock Operation Parts] function, it will be unlocked temporarily when “My Dial” is
recalled.
Related Topic
Assigning frequently used functions to buttons and dials (Custom Key/Dial Set.)
5-043-036-11(1)
Copyright 2022 Sony Corporation
Operation part My Dial 1 My Dial 2 My Dial 3
Control wheel
ISO White Balance Not set
Front dial Aperture
Creative Look Move AF Frame : Std
Rear dial Shutter Speed
Exposure Comp. Move AF Frame : Std
Press the 1 button (Custom button 1).
The functions registered to [My Dial 1] will be assigned to the control wheel, the front dial, and the rear dial.
The icons for the functions registered to [My Dial 1] are displayed in the lower part of the screen.
1.
Turn the control wheel to set the ISO value, turn the front dial to set the aperture value, and turn the rear dial to set
the shutter speed.
2.
Press the 1 button (Custom button 1) again. The functions registered to [My Dial 2] will be assigned to the control
wheel, the front dial, and the rear dial.
3.
Turn the control wheel to set [
White Balance], turn the front dial to set [ Creative Look], and turn the rear dial
to set [
Exposure Comp.].
4.
Press the 1 button (Custom button 1) again, and change the setting values for the functions registered to [My Dial 3].5.
To Next Page
Loading...
Need help?
General
