Help Guide
Interchangeable Lens Digital Camera
ILME-FX30
Pixel Mapping
You can manually optimize the image sensor (pixel mapping). Perform [Pixel Mapping] regularly according to the
following procedure. We recommend that you perform the operation once every three days.
Hint
When you turn the camera on, a message to perform pixel mapping will occasionally be displayed. If the message is displayed,
perform [Pixel Mapping].
If you see bright spots in a recorded image on the camera monitor, immediately perform [Pixel Mapping].
Note
Pixel mapping cannot be performed when the battery is low.
If [Pixel Mapping] is not performed regularly, bright spots may appear in recorded images.
5-043-036-11(1)
Copyright 2022 Sony Corporation
MENU →
(Setup) → [Setup Option] → select [Pixel Mapping].
1
Attach the lens cap.
Be sure to attach the lens cap.
2
Select [OK] on the confirmation screen.
Pixel mapping will be performed.
The camera cannot be operated during pixel mapping.
The camera will restart when pixel mapping is complete.
3
To Next Page
Loading...
Need help?
General
