Help Guide
Interchangeable Lens Digital Camera
ILME-FX30
Exposure Std. Adjust (still image/movie)
Adjusts this camera's standard for the correct exposure value for each metering mode.
Metering Mode
The set standard value will be applied when you select the corresponding metering mode in MENU →
(Exposure/Color) → [Metering] → [ Metering Mode].
Multi/ Center/ Spot/ Entire Screen Average/ Highlight
Note
The exposure compensation will not be affected when [
Exposure Std. Adjust] is changed.
The exposure value will be locked according to the value set for [
Spot] during using spot AEL.
The standard value for M.M (Metered Manual) will be changed according to the value set in [
Exposure Std. Adjust].
The value set in [
Exposure Std. Adjust] is recorded in Exif data separately from the exposure compensation value. The
amount of exposure standard value will not be added to the exposure compensation value.
If you set [
Exposure Std. Adjust] during bracketing shooting, the number of shots for the bracketing will be reset.
Related Topic
Metering Mode (still image/movie)
5-043-036-11(1)
Copyright 2022 Sony Corporation
MENU →
(Exposure/Color) → [Exposure Comp.] → [ Exposure Std. Adjust] → desired metering
mode.
1
Select the desired value as the metering standard.
You can set a value from -1 EV to +1 EV in 1/6 EV increments.
2
To Next Page
Loading...
Need help?
General
