33
ZOOM/FOCUS Menu
The ZOOM/FOCUS menu is used to select the
zoom/focus mode.
ZOOM MODE
Select the zoom mode.
[OPTICAL]: Z
ooms objects within the optical
zoom range (up to 20x) of the camera.
[CLEAR IMAGE ZOOM] (Clear Image Zoom): An
ima
ge is zoomed with less deterioration of
image quality over the optical region.
Zooming is up to 1.5× when the video
output format is 4K, and up to 2× for other
formats.
[DIGITAL]: A
n image can be zoomed up to 20×
optical zoom and 12× digital zoom
(including Clear Image Zoom) with up to a
total of 240× zoom.
FOCUS MODE
Select the focus mode.
[AUTO]: The
camera focuses automatically.
[MANUAL]:
You can focus manually. Adjust
using the supplied remote commander or
optional remote controller.
Notes
Select [MANUAL] and adjust the focus manually
when shooting the following objects.
• White walls and other objects without contrast
• Objects behind glass
• Objects with horizontal stripes
• Objects on which bright lights are cast or
re
flected
• Nightscapes and other dark objects with
b
linking lights
• Lit objects shot with darkened exposure
ad
justment or exposure compensation
settings
PICTURE Menu
The PICTURE menu is used to adjust the picture
quality improvement features.
HIGH RESOLUTION
You can set [HIGH RESOLUTION] (High resolution
mode) to [ON] or [OFF]. When set to [ON], you
can enjoy emphasized edge and high-resolution
images.
Notes
• When set to [ON], image noise may increase
more than when set to [OFF].
• When [MODE] is set to [MANUAL] in [DETAIL],
the
function is not available.
NOISE REDUCTION
You can obtain clearer images by removing
unnecessary noise (fixed pattern and
randomized noise) with [NOISE REDUCTION].
Choose from [OFF] or level 1 through level 5.
When you select [ADVANCED], you can set up [2D
NR LEVEL] and [3D NR LEVEL] independently.
2D NR LEVEL
This is enabled when [NOISE REDUCTION] is
[ADVANCED]. Choose from [OFF] or level [1]
through level [5] for noise reduction.
3D NR LEVEL
This is enabled when [NOISE REDUCTION] is
[ADVANCED]. Choose from [OFF] or level [1]
through level [5] for noise reduction.
FLICKER CANCEL
When this is turned [ON], the flicker correction
feature becomes enabled.
When this is turned [OFF], the flicker correction
feat
ure becomes disabled.
Note
Depending on conditions such as the type of
illumination and shutter speed, the flicker
correction feature may not be effective.
If the frame rate is close to the power supply
f
requency, the flicker correction feature may not
be able to fully remove flickers, even if it is
To Next Page
Loading...
Need help?
General
