Sony XVS-8000 User Manual

247
2 Press [Glow], turning it on.
The key border function and glow function cannot be
enabled at the same time. The most recently set
function is enabled.
3 Set the following parameters.
4 Press [Matte] and set the glow color.
To invert the highlight areas
Press [Glow Invert], turning it on.
The highlight and non-highlight areas are inverted.
To mask the Glow effect with a selected pattern
Press [Mask] to open the DME >Video Modify >Mask
menu (4127), and set the type of pattern and modifiers (see
page 247).
When the signal format is 1080P, masking will cause the
edges to become blurred.
Mask Settings
Applying the Mask effect
1 Open the DME >Video Modify >Mask menu (4127).
2 In the <Mask> group, select the effect group you want
to apply the mask.
Effect Gp1: Posterization, Solarization, Nega, Sepia,
Mono, Contrast, Mosaic, Sketch, Metal
Effect Gp2: Defocus, Blur, Glow
3 Press [Position/Size].
4 Set the following parameters.
a) Pattern numbers 21, 24, and 304
5 To invert the mask source, press [Invert], turning it on.
6 Set the modifiers for the mask pattern as required.
When selecting [Aspect] and adjusting the pattern
aspect ratio
a) When a minus value is specified, the picture is extended in the
vertical direction. When a plus value is specified, the picture is
extended in the horizontal direction.
When selecting [Angle] in the <Rotation> group
and slanting the pattern
a) –1.00 is one rotation in the counterclockwise direction. +1.00 is one
rotation in the clockwise direction. 0.00 is no rotation.
When selecting [Speed] in the <Rotation> group
and rotating the pattern at a constant speed
a) –100.00 is four rotations per second in counterclockwise direction.
+100.00 is four rotations per second in clockwise direction. 0.00 is in
stationary state.
Notes on applying a mask effect with a DME
If [Effect Gp1] and [Effect Gp2] are simultaneously
enabled in the <Mask> group of the DME >Video Modify
>Mask menu (4127), then the border or beveled edge is
also masked.
The following describes masking using a round pattern as
an example.
Note
No. Parameter Adjustment
1 Clip Reference level for highlight
detection
2 Gain Gain level for highlights
3 Soft Softness
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3Hue Hue
Note
No. Parameter Adjustment
1 H Horizontal position
2 V Vertical position
3 Size Size of mask
4 Soft Softness of mask
5 Pattern Pattern number
a)
No. Parameter Adjustment
1 Aspect Aspect ratio
a)
No. Parameter Adjustment
1 Angle Rotation angle of pattern
a)
No. Parameter Adjustment
1 Speed Rotation speed of pattern
a)

Sony XVS-8000 Specifications

General

Brand	Sony
Model	XVS-8000
Category	Switch
Language	English