485
12. Internal Parameter (10): Reserved for future use
(set to 255)
5
Set the value.
When “IP Address” is selected
Press [IP Address]. Enter the address using the
keyboard window, press [Enter], then skip to step 7.
When [Port] is selected
Press [Port]. Enter the port number using the numeric
keypad window, press [Enter], then skip to step 7.
6
Press [Set].
7
Repeat steps 4 to 6 as required to make the settings for
other items.
No. Parameter Adjustment
2Setting Setting
To Next Page
Loading...
Need help?
General
