INSTRUMENTS AND CONTROLS 3–29
1
0
HEADLAMP LEVELING SWITCH*
With the low beam switched on, adjust the
aiming angle of headlights to suit the vehicle
load.
• To lower the aiming angle, push the
switch downward.
• To raise the aiming angle, push the
switch upward.
NOTE
According to load condition, adjust
the aiming angle of headlights.
4 WHEEL DRIVE SWITCH
The indicator light will come on according to
the 4WD operation.
[Part-time]
[TOD]
Part Time 4WD System
To operate the 4WD, rotate the switch to ‘4H’
or ‘4L’.
• 2H : 2-wheel drive, normal drive mode.
• 4H : 4-wheel drive high speed.
• 4L : 4-wheel drive low speed.
TOD 4WD System
Rotate the switch according to road condi-
tion.
• 4H : 4-wheel drive high speed, normal
drive mode
• 4L : 4-wheel drive low speed
K140_RHD_EN_03.p65 2004-11-11, ¿ÀÈÄ 4:0829
To Next Page
Loading...
Need help?
General
