SSANGYONG KORANDO 2005 User Manual

3–20 INSTRUMENTS AND CONTROLS
HIGH BEAM SWITCH
To turn on the high beam headlights push the
lever towards the instrument panel with the
low beam headlights on.
The headlight high beam indicator light in the
instrument panel comes on when the head-
lights are on high beam.
For low beam headlights, pull the lever back
towards the steering wheel to the normal
position.
NOTE
The light switch must already be in
the position.
TURN SIGNAL SWITCH
Move this lever up to the stop position to
signal a right turn.
Move this lever down to the stop position to
signal a left turn.
When the turn is completed, the signal will
be cancelled and the lever will be returned
to the normal position.
When changing lanes, move the switch part
way and hold it there. When released, the
switch will spring back to the normal
position.
CAUTION
Battery will discharge.
Do not leave the lights on while en-
gine is off.
DAYTIME RUNNING LIGHTS
INDICATOR*
Indicates the daytime running lights are on.
If so equipped, the daytime running lights il-
luminate automatically when the ignition is
ON and the parking brake is released.
The daytime running lights will turn off un-
der the following conditions:
• Ignition is turned off.
• Parking brake is engaged.
• High-beam lamps on.
• Low-beam lamps on.
K140_RHD_EN_03.p65 2004-11-11, ¿ÀÈÄ 4:0820

SSANGYONG KORANDO 2005 Specifications

General

Brand	SSANGYONG
Model	KORANDO 2005
Category	Automobile
Language	English