SSANGYONG KORANDO 2005 User Manual

3–24 INSTRUMENTS AND CONTROLS
Accelerating With Cruise Control Sys-
tem
• While cruise control system is running
1. Push up the ACCEL.SET. switch of a
cruise control lever and hold it until the
desired speed is reached without an
acceleration pedal intervention.
2. When the desired speed is reached,
release the lever.
• While cruise control system is not run-
ning
1. Accelerate using the acceleration pedal
more over 36km/h.
2. Push up the ACCEL.SET switch of a
cruise control lever and hold it.
3. And then release the acceleration pedal,
slowly.
4. When the desired speed is reached,
release the lever.
Setting a Desired Speed
1. To operate the cruise control, acceler-
ate to your desired speed using the
acceleration pedal more over 36km/h.
2. When the desired speed is reached,
push up the ACCEL.SET. switch of a
cruise control lever or push down the
DECEL.SET. switch for 1 second per one
switching and then release the accelera-
tion pedal, slowly.
3. Now, the vehicle is cruised by this sys-
tem with set speed.
4. And you can set to other vehicle speed
again with above steps after accelera-
tion pedal intervention during cruise con-
trol running.
CRUISE CONTROL*
(FOR GASOLINE ENGINE)
Cruise control is an automatic speed control
system that maintains a desired driving
speed without using the accelerator pedal.
The vehicle speed must be greater than
36km/h to engage cruise control. This fea-
ture is especially useful for freeway driving.
CAUTION
Improper use of cruise control could
be dangerous.
• Do not use on winding roads.
• Do not use in heavy traffic.
• Do not use on slippery, wet roads.
This could result in a loss of control,
collision, and/or personal injuries.
K140_RHD_EN_03.p65 2004-11-11, ¿ÀÈÄ 4:0824

SSANGYONG KORANDO 2005 Specifications

General

Brand	SSANGYONG
Model	KORANDO 2005
Category	Automobile
Language	English