3–22 INSTRUMENTS AND CONTROLS
WINDSHIELD WASHER SWITCH
To spray washer fluid on the windshield, pull
the lever towards the steering wheel with
the ighnition on.
When you pull the lever for less than about
0.6 seconds, the washer fluid is sprayed
onto the windshield, but the windows wip-
ers are not operated.
When you pull the lever for more than about
0.6 second, the washer fluid is sprayed onto
the windshield while you pull the lever and
then the windshield wipers are operated for
several cycles. When you release the lever,
the wipers automatically returns to the rest
position.
CAUTION
Wiper operation on dry windshield
can scratch glass and wear the
blades prematurely.
Do not operate wipers when wind-
shield is dry.
CAUTION
Wiper operation with obstructions,
such as snow, can damage wiper
motor.
Clear obstruction before operating.
CAUTION
Wiper blades can freeze to wind-
shield in cold weather.
Wiper operation while blade is fro-
zen can damage wiper motor.
Check blades not frozen to wind-
shield before operating.
Intermittent Wiper Control
The interval of wiper swings can be ad-
justed by twisting the control knob upward
or downward when the windshield wiper
switch is in “INT” position.
• F : Fast interval
• S : Slow interval
The intermittent wiper operates automatically
according to the vehicle speed when the
wiper switch is in the “INT” position.
K140_RHD_EN_03.p65 2004-11-11, ¿ÀÈÄ 4:0822