– 15 –
ENGLISH
5. Loading the Roll Paper
Be sure to use roll paper that matches the printer’s specification.
When using a paper roll with an 82.5 mm width, remove the paper roll holder as
described on the following page.
Push the Cover open lever, and open
the printer cover.
While observing the direction of the
roll, set the paper roll into the hollow,
and pull on the leading edge of the
paper toward you.
Note 1: When using paper with a thick-
ness which requires the use of the ten-
sion bar (65
µ
m paper thickness<100
µ
m), be sure not to pass the paper under
the tension bar.
Cover open lever
Roll paper
Tension bar
To Next Page
Loading...
Need help?
General
