Star Micronics TSP700 Series User Manual

– 66 –
ITALIANO
INDICE
1. Identificazione delle parti e nomenclatura ..................................................67
2. Parti soggette a consumo e trasformatore CA ............................................69
3. Cavi di collegamento e trasformatore CA ...................................................71
3-1. Cavo interfaccia ...................................................................................71
3-2. Collegamento ad un’unità periferica....................................................75
3-3. Collegamento del trasformatore CA opzionale....................................76
3-4. Accensione ...........................................................................................77
4. Pannello di controllo e altre funzioni ...........................................................78
4-1. Pannello di controllo ............................................................................78
4-2. Errori ....................................................................................................78
4-3. Stampa automatica ...............................................................................80
5. Inserimento del rotolo di carta .....................................................................81
6. Regolazione del sensore di esaurimento prossimo......................................84
7. Prevenzione e soluzione degli inceppamenti della carta ............................86
7-1. Prevenzione degli inceppamenti della carta.........................................86
7-2. Eliminazione degli inceppamenti della carta .......................................86
8. Pulizia periodica ............................................................................................87
8-1. Pulizia della testina termica .................................................................87
8-2. Pulizia del comparto carta....................................................................87
APPENDICE ......................................................................................................88
L’Appendice appare solo nella sezione in inglese di questo manuale.
Visitare il seguente indirizzo URL
http://www.star-m.jp/eng/dl/dl02.htm
per accedere alla versione più recente del manuale.

Star Micronics TSP700 Series Specifications

General

Print Resolution	203 dpi
Print Width	72 mm
Interface	USB, Serial, Ethernet
Paper Thickness	0.085 mm
Auto Cutter	Yes

Summary

Parts Identification and Nomenclature

Consumable Parts and AC Adapter

Connecting Cables and AC Adapter

Interface Cable

Details on connecting various interface cables to the printer.

Connecting to a Peripheral Unit

Instructions for connecting peripheral devices like cash drawers.

Connecting the Optional AC Adapter

Steps for connecting the printer's power adapter.

Turning Power On

Procedure for powering the printer on and checking the power indicator.

Control Panel and Other Functions

Control Panel

Explains the printer's control panel buttons and LEDs.

Errors

Lists printer errors, their causes, and recovery methods.

Self Printing

Describes test printing and hexadecimal dump modes.

Loading the Roll Paper

Adjusting the Near-end Sensor

Preventing and Clearing Paper Jams

Preventing Paper Jams

Guidelines to avoid paper jams during operation.

Removing Paper Jam

Step-by-step instructions for clearing a paper jam.

Periodical Cleaning

Cleaning the Thermal Head

Instructions for cleaning the printer's thermal head.

Cleaning the Paper Holder

Steps for cleaning the paper holder and transport section.

Appendix A: Specifications

General Specifications

Overview of printer's general technical specifications.

Auto Cutter Specifications

Technical details for the auto cutter function.

Interface

Lists supported interface types for the printer.

Electrical Characteristics

Electrical power and consumption specifications.

Option

Lists available optional accessories for the printer.

Environmental Requirements

Details operating and storage environmental conditions.

Reliability

Information on the printer's expected lifespan and reliability.

Black mark specifications

Specifications for using black marks for sensing.

Appendix B: Dip Switch Setting

Parallel Interface Model

DIP switch settings for the parallel interface model.

Serial Interface Model

DIP switch settings for the serial interface model.

USB Interface Model

DIP switch settings for the USB interface model.

Ethernet Interface Model

DIP switch settings for the Ethernet interface model.

Wireless LAN Interface Model

DIP switch settings for the wireless LAN interface model.

Appendix C: Parallel Interface

Appendix D: Serial Interface

RS-232C Connector

Details on the RS-232C connector pinout and functions.

Cable Connections

Recommended interface cable connection diagrams.

Electrical Characteristics

Electrical signal characteristics for serial interface.

Appendix E: USB, Ethernet and Wireless LAN Interface

USB Interface Specifications

Technical specifications for the USB interface.

Ethernet Interface Specifications

Technical specifications for the Ethernet interface.

Wireless LAN Interface Specifications

Technical specifications for the Wireless LAN interface.

Appendix F: Peripheral Unit Drive Circuit

Peripheral Drive Connector

Details on the peripheral drive connector and its pins.

Appendix G: Memory Switch Settings