Star Micronics TSP700 Series User Manual

– 6 –
ENGLISH
3-1-2. Parallel Interface Cable
(1)Make sure the printer is turn off.
(2)Affix the ferrite core onto the cable
as shown in the illustration.
(3)Pass the fastener through the ferrite
core.
(4)Loop the fastener around the cable
and lock it. Use scissors to cut off
any excess.
Ferrite core
Interface cable
5 cm
(maximum)
Fastener
Pull and cut

Star Micronics TSP700 Series Specifications

General

Brand	Star Micronics
Model	TSP700 Series
Category	Printer
Language	English