36 EN
4. INSTALLATION
WARNING:
The surface or pole on which the satellite reference station is mounted must be
stable and not move, sway or rotate, e.g. under strong wind or adverse weather
accuracy of the robot lawn mower.
WARNING:
When installing the satellite reference station, proceed with caution. There is a
risk of falling from considerable heights or of falling objects.
WARNING:
If the satellite reference station is moved, the virtual boundaries, transfer routes
WARNING:
position.
4.5.3. RECHARGE THE ROBOT LAWN MOWER AFTER INSTALLATION
Please recharge the robot lawn mower before proceeding with the programming of virtual boundaries.
Requirements and obligations:
• charging base.
Procedure:
1. Recharge the robot lawn mower (See Par 5.5).
NOTE: When charged for the rst time, the batteries must remain connected for at least 2 hours.
4.6. PROGRAMMING VIRTUAL PERIMETERS, TRANSITION ROUTES AND AREAS TO BE
AVOIDED
The programming of the virtual perimeters, transition routes and areas to be avoided is performed using
the respective “STIGA.GO APP” wizards. The procedure requires you to guide the robot lawn mower
manually by walking alongside it according to the general instructions provided in Chap. 4.4.
Requirements and obligations:
• Android or iOS mobile device connected to the internet (not included).
To Next Page
Loading...
Need help?
General
