48 EN
5. OPERATION
5. OPERATION
Requirements and obligations:
• Installation of the charging base
and satellite reference station (See
Chapter 4.5)
• Programming virtual boundaries, transition
routes and areas to be avoided (See par. 5.6)
• Initial grass height in the robot lawn
mower operating range: 20-60 mm
• Battery charged (See Par. 5.5) • Cutting height suitably adjusted (See
Par. 5.6)
5.1. CHECK OF SAFETY DEVICES FOR STARTING THE ROBOT LAWN MOWER
Requirements and obligations:
• Safety key
Procedure:
1. Check that the oating cover (A) is tted correctly. If the cover is missing the robot lawn mower doesn't
work.
2. Check that the safety key (E) is inserted If it is not inserted the robot lawn mower doesn't start.
3. Make sure that the stop button “STOP” (B) is not switched on. If pressed, it stops the robot lawn mower
and opens the protective cover (C) of the control console (D).
4. Check that the robot lawn mower is positioned on the ground correctly. In the event of excessive tilting(≥
45% or >50 %) and lifting, the tilt sensors (inclinometer) will stop the robot lawn mower.
A
D
EB C
To Next Page
Loading...
Need help?
General
