10
EN
ENGLISH
(Translation of the Original Instructions)
• Keep all nuts, bolts and screws tight to be sure
the equipment is in safe working condition.
Regular maintenance is essential for safety and
for maintaining performance levels.
• Regularly check that the cutting deck blade
screws are securely tightened.
handling the cutter blade assy during
removal and reinstallation operations.
Check the cutting blade’s balance after
sharpening. All operations concerning
the cutting deck assy (disassembling,
sharpening, balancing, assembling
authorized service centre.
• Regularly check the brakes work properly.
It is important to service the brakes and
repair them if necessary.
• Replace any damaged warning and
instruction stickers.
• If the machine has no mechanical
stoppers for transport, accessories must
always be resting on the ground when
the machine is parked, stored or left
unattended.
• Store the machine where children cannot
get to it.
-
• Allow the engine to cool before storing in
an enclosed space.
• To reduce the re hazard, keep the
engine, exhaust silencer, battery
compartment and fuel storage area free
of grass, leaves, or excessive grease.
• To reduce the risk of re, regularly check
the machine for oil and/or fuel leaks.
• If the fuel tank has to be drained, this
should be done outdoors and when the
engine is cool.
• The ignition key must never be left
inserted in the machine, or where children
or persons not familiar to the machine
may reach it. Before any maintenance or
repair, remove the ignition key.
CAUTION! – Battery acid is corrosive.
In the event of mechanical damage or
overcharging, acid may leak out. Avoid
the body.
Inhaled acid fumes are harmful to mu-
cous membranes and other internal
organs. Seek medical attention imme-
diately.
CAUTION! – Do not overcharge the bat-
acid leaks.
CAUTION! – Acid can seriously damage
tools, clothing and other materials. Rin-
Do not short circuit the battery termi-
TAKE CARE over the hydraulic compo-
seriously damage tissues and need im-
mediate medical attention.
3.5 TRANSPORTING
CAUTION! - If the machine is transpor-
During transport, close the fuel
deck assy or the accessory, engage the
parking brake and fasten the machine
hauling device.
3.6 ENVIRONMENTAL PROTECTION
• Safeguarding the environment must be a re-
levant and priority aspect of machine use, of
benet to the community and the environment
we live in. Avoid being a disturbance to the
neighbourhood.
• Adhere strictly to the local regulations gover-
ning the disposal of packaging, oil, fuel, lters,
damaged parts or any other element which
may have an impact on the environment; this
waste should not be disposed of along with
standard household waste, but must be dispo-
sed of separately and sent to special waste
disposal facilities for handling and recycling.
To Next Page
Loading...
Need help?
General
