Stryker CrossFlow Service Manual

EN-12
DRAFT
Operation
Note: Refer to the “Symbols and Terminology” section in this manual for button and icon denitions and
commonly used terms�
Starting a Procedure
To start a procedure, perform the following steps:
1� Power the Pump On and O
2� Insert the Inow/Outow Cassette
3� Select the User Preference File
4� Select the Joint
5� Prime the Inow Tubing and Operate the Pump
Power the Pump On and O
1� Press located at the bottom left corner of
the front panel to power on the pump� When
this button is illuminated by a green LED, the
system is powered on� The pump will display
a splash screen while the software is loading�
2� To power o the system, press again�
Insert the Inow/Outow Cassette
Warning
The choice of irrigation uid should be determined by the physician, based on the operation method
to be employed�
Caution
The cassettes are color-coded� When inserting the cassettes, make sure to insert them as indicated by
the color-coding�

Stryker CrossFlow Specifications

General

Brand	Stryker
Model	CrossFlow
Category	Water Pump
Language	English