Stryker CrossFlow Service Manual

EN-6
DRAFT
About Your Product
Product Description/Intended Use
The Stryker CrossFlow Integrated Arthroscopy Pump is a uid management system� Illustrated below, the
system is composed of a pump console with inow-only and inow/outow modes, disposable cassette
tubing, a wired hand control, and a wired footswitch� The system integrates with approved resection
consoles�
1� CrossFlow Integrated Arthroscopy Pump (featured in this manual) - Compatible with the Crossre
Console, CrossFlow Footswitch, Autoclavable Hand Control, iSwitch Wireless Universal Foot Control,
Stryker rewire-compatible devices, and approved resection consoles�
2� CrossFlow Cassette Tubing - Compatible with the CrossFlow Integrated Arthroscopy Pump, 4-bag
adapter with inow cassettes, luer-lock connectors, standard irrigation uids, suction connectors, and
waste management systems� The user may elect to employ one of two modes of operation:
• Inow-Only Mode: utilizes only the inow function of the pump via the Inow Cassette Tubing or
the Day-Use Inow Cassette/Patient-Use Tubing
• Inow Cassette Tubing - The Inow Cassette Tubing transmits uid from saline bags to the
inow cannula at the surgical site and is disposed of after each case�
• Day-Use Inow Cassette/Patient-Use Tubing - The Day-Use Inow Cassette Tubing is used for
a single day’s cases, and the Patient-Use Tubing is connected to the Day-Use Inow Cassette
Tubing for a single case, then removed and discarded�
• Inow/Outow Mode: utilizes both the inow and outow functions of the pump via the Inow
Cassette Tubing and Outow Cassette Tubing�
3� CrossFlow Footswitch (optional) - Provides remote foot control of pump operation�
4� Autoclavable Hand Control (optional) - Provides remote hand control of pump operation�

Stryker CrossFlow Specifications

General

Brand	Stryker
Model	CrossFlow
Category	Water Pump
Language	English