GENERAL INFORMATION 1-13
Item Unit
Data
DF60T DF70(W)T/70WTH
ELECTRICAL
BTDC 4° – BTDC 33°
Ignition timing
Approx. 6500r/min
Over revolution limiter
Ω at 20°C
CKP sensor resistance
Ω at 20°C
CMP sensor resistance
Ω at 20°C
Ignition coil
resistance
Primary
k Ω at 20°C
Secondary
Ω at 20°C
Battery charge coil resistance
Watt
Battery charge coil output (12V)
NGK
Standard spark
plug
Type
mm (in)
Gap
0.7 – 0.8 (0.028 – 0.031)
A
Fuse amp. rating
Main fuse : 30
Ah (kC)
Recommended battery
capacity (12V)
100 (360) or over
Ω at 20°C
Fuel injector resistance
Ω at 20°C
IAC valve resistance
k Ω at 25°C
IAT sensor/Cylinder temp. sensor
/Exhaust manifold temp. sensor
(Thermistor characteristic)
Ω at 20°C
ECM main relay resistance
Ω at 20°C
Starter motor relay resistance
Ω at 20°C
PTT motor relay resistance
1.8 – 2.3
80 – 120
3.5 – 5.1
3.0 – 4.5
168 – 252
1.9 – 2.5
No.2 – No.3: 15 – 26 (including H.T. cord and spark plug cap)
No.1 – No.4: 16 – 28 (including H.T. cord and spark plug cap)
BPR6ES
0.3 – 0.5
300
11.0 – 16.6
4.8 – 7.2
k Ω /m at 20°C
High tension cord resistance
Approx. 16
STARTER MOTOR
30
Sec
Max. continuous time of use
0.9
kW
Motor output
17.0 (0.67)
mm (in)
STD
Brush length
10.0 (0.39)
mm (in)
Limit
0.5 – 0.8 (0.02 – 0.03)
mm (in)
STD
Commutator
undercut
0.2 (0.01)
mm (in)
Limit
33.0 (1.30)
mm (in)
STD
Commutator
outside diameter
32.0 (1.26)
mm (in)
Limit
0.05 (0.002)
mm (in)
STD
Commutator outside
diameter difference
0.40 (0.016)
mm (in)
Limit
Pinion to ring gear gap
3.0 – 5.0 (0.12 – 0.20)
STD
mm (in)
PTT MOTOR
9.8 (0.39)mm (in)
Brush length
5.5 (0.22)
mm (in)
22.0 (0.87)
mm (in)
Commutactor outside
diameter
21.0 (0.83)
mm (in)
STD
Limit
STD
Limit
BTDC 4° – BTDC 29°
To Next Page
Loading...
Need help?
General
