6-28 POWER UNIT
CYLINDER / CRANKSHAFT / PISTON
DISASSEMBLY
Before disassembling:
• Remove the power unit. (See the page 6-6.)
• Remove the cylinder head assy. (See the page 6-14.)
1. Remove the timing pulley nut 1.
$ 09911-49910: Crankshaft holder
Remove the washer 2, the guide 3, the timing pulley 4 and
the key 5.
2. Remove the oil filter.
$ 09915-47340: Oil filter wrench
3. Remove the oil pressure switch.