7-12 CHASSIS
INSPECTION AND DISASSEMBLY
DUST SEAL
Inspect the dust seal lips for wear or damage.
If any damages are found, replace the dust seal with a new one.
 Remove the dust seals with the special tool.
% 09913-50121: Oil seal remover
$
HUB BEARINGS
Inspect the inner race play of the hub bearing by hand while it is
in the wheel hub.
Rotate the inner race by hand to inspect for abnormal noise and
smooth rotation. If there is anything unusual, replace the bearing
with a new one.
 Remove the hub bearings with the special tool.
% 09921-20240: Bearing remover set
$
Replace the removed dust seals with new ones.
Never reuse the removed bearings.
PartShark.com
877-999-5686
To Next Page
Need help?
General
