Suzuki LT-Z250 User Manual

7-38 CHASSIS
 Remove the steering shaft.
 Remove the dust seal
F from the steering shaft.
INSPECTION AND DISASSEMBLY
Inspect the removed parts for the following abnormalities.
* Handlebar distortion
* Handlebar clamp wear
DUST SEALS AND O-RING
Inspect the dust seals and O-ring for wear or damage. If any
damages are found, replace the dust seals with new ones.
TIE ROD
Inspect the tie rod for distortion or damage. If any damages are
found, replace the tie rod with a new one.
1 Tie rod end
2 Locknut
3 Locknut
4 Tie rod
$
TIE ROD END
Inspect the tie rod ends for smooth movement. If there are any
abnormalities, replace the tie rod end with a new one.
Inspect the tie rod end boot for wear or damage.
If any damages are found, replace the tie rod end with a new
one.
The locknuts
2 with a yellow finished surface have
left-hand threads.
PartShark.com
877-999-5686

Suzuki LT-Z250 Specifications

General

Brand	Suzuki
Model	LT-Z250
Category	Motorcycle
Language	English