Swift Sterling User Manual

SERVICES
59
• The same external pump can be used with
the upper inlet, this will transfer water from
the external source to the internal tank.
• When filling the internal tank, monitor the
amount of water in the tank and stop filling
before the tank overflows via the switch on
the control panel.
• Please see label on bed flap rear for valve
operation.
• The control panel above the door has
buttons to turn on and off both the internal
and external pumps.
White valve
Water heater
drain valve
Tank drain
valve
On Arrival at the campsite /
Priming the system
The caravan water system can be used with or
without the internal water tank.
To use the caravan without the internal
water tank:
• Ensure that the external water container
is full.
• Connect the external pump to the lower
connection point on the outside of the
caravan, labelled ‘direct to taps’.
• Move the White selector valve close to
the pump anti-clockwise to select the
external source.
• Close all of the taps except one, and follow
the steps as detailed for a caravan without
internal water tank.
To use the caravan with the internal
water tank:
• Connect the external pump to the upper
connection point on the outside of the
caravan, labelled ‘direct to tank’.

Swift Sterling Specifications

General

Brand	Swift
Model	Sterling
Category	Caravans
Language	English