M2000-00
T2000-A70 Data Modem Kit
8.15.3
Copyright TEL 31/12/97
Figure 8.15.2 T2000-A70 Data Modem PCB Mounting
3 T2000 Data Interface Decoupling PCB Mounting
Unclip the D-range blanking plate in the rear of the T2000 chassis.
a T2000 Series I Chassis
Refer to Figure 8.15.3.
Figure 8.15.3 Data Interface Decoupling PCB Mounting: Series I Chassis
Holes are provided in the T2000 chassis for the D-range screw locks. Use the 2
black 4-40 Taptite screws provided in the kit to form threads.
Fit the decoupling PCB to the T2000 chassis, guiding the PCB through the hole
provided, as shown.
Open the female screw lock kit, then secure the D-range using the 2 screw locks
and spring washers.
To Next Page
Loading...
Need help?
General
