Tait T2000 II Series User Manual

M2000-00 T2000-A70 Data Modem Kit 8.15.11
Copyright TEL 31/12/97
Software Tests
The following Table explains the commands that may be sent to test the software.
Table 8.15.4 Software Test Commands
Command Test Procedure Expected Result
Go To Channel 1.
Send command “g01206” Radio changes channel to 2, then returns the
command prompt.
2.
Send command “g0203D4” Radio changes channel to 3, then returns the
command prompt.
3.
Send command “g03004A2” Radio changes channel to 4, then returns the
command prompt.
4.
Send command “g0225D0” Radio sends error message “e03020A6”
(invalid channel)
Transmit 1.
Send command “b04this82” Radio transmits this data and “i04this7B” is
received by the other radio.
2.
Send command “b17This is a test
command.14”
Radio transmits this data and “i17This is a
test command.0D” is received by the other
radio.
3.
Send a “b” command while the
PTT is pressed.
Radio sends error message ”e03010A7”
(communication error)
4.
Send a command while the busy
led is lit
Radio sends error message “e03010A7”
(communication error)
Null
Send command “n0032” Radio returns a prompt (“
•
”).
Query
Send command “q002F”
T2010:
a valid message could be
“m0C31.011.01004D9” i.e.
[RU TYPE] = T2010,
[VERSION] = 1.01
[PVERSION] = 1.01
[NUM CHANNELS] = 04
T2015:
a valid message could be
“m0C41.011.01024D6”
[RU TYPE] = T2015,
[VERSION] = 1.01
[PVERSION] = 1.01
[NUM CHANNELS] = 24
Command Line Errors 1.
Send command ”b03this83” Radio sends error message “e03003A5”
(parameter error).
2.
Send command “b04this83” Radio sends error message “e03002A6”
(checksum error).
3.
Send command “t04this70” Radio sends error message “e03001A7”
(unsupported command).

Tait T2000 II Series Specifications

General

Brand	Tait
Model	T2000 II Series
Category	Two-Way Radio
Language	English