6-6
TROUBLESHOOTING
IF A FUSE BLOWS
If a light does not come on or the electrical
system does not work, a fuse may be blown.
Inspect the fuses.
INSPECTING AND REPLACING THE FUSE
If the fuse blows again soon after
replacement, then the electric system is
likely faulty. It may pose a fire hazard if
not properly repaired. Contact your sales
or service dealer for advice.
1.
Turn the starter key to the OFF position to
stop the engine.
2.
Open the maintenance cover B.
IF A FUSE BLOWS
3. Open the fuse box cover (1).
4. Check for any blown fuses.
5. If a fuse is blown, replace it with a spare
fuse of the same capacity.
Fuse layout and cir
cuits protected
Capacity Symbol Protected circuit
25A Starter switch
10A AUX3
Thir
d auxiliary
hydraulic
5A Lever lock
15A Light
15A Feed pump
15A OPT Option
10A Hor
n
15A Cluster
To Next Page
Loading...
Need help?
General
