2-11
CONTROLS
INDICATORS
6. Glow lamp
This lamp goes out when the engine
preheating is completed.
7. Travel speed lamp
This lamp turns on when the travel speed
button is set to the 2nd (high) speed.
METERS
8. Water temperature gauge
Indicates the temperature of the engine
coolant water.
The LED should be within the green range
during machine operation.
The red range indicates overheating.
9. Fuel Gauge
Indicates the amount of fuel in the tank.
Be sure to top off the tank before running
out of fuel.
INSTRUMENT CLUSTER
5. Fuel level warning lamp
This lamp turns on if the fuel level
becomes low while the starter switch is in
the ON position.
To Next Page
Loading...
Need help?
General
