2-18
CONTROLS
SWITCHES
STARTER SWITCH
SWITCHES
IMPORTANT: Do not repeatedly switch
the key from OFF to ON and ON to OFF
over a short period. Doing so will cause
engine breakdown.
OFF ......... Position for stopping the engine
and inserting or r
emoving the key.
ON .......... Position in which the engine is
running. At this position, all the
electrical equipment is functional.
When the coolant temperatur
e is
too low, the engine is
automatically preheated.
START ..... Position for starting the engine.
When the key is released, the
switch automatically returns to the
ON position.
HORN BUTTON
Press the button situated on the right
operating lever to blow the horn.
TRAVEL SPEED SWITCH
Press this switch to set the travel speed to
2nd (high) speed. Press it again to return to
1st (low) speed.
SECOND AUXILIARY HYDRAULIC
SWITCH
Refer to “Second auxiliary hydraulic switch”
on page 2-26.
THIRD AUXILIARY HYDRAULIC SWITCH
AND BUTTON
Refer to “Third auxiliary hydraulic switch and
button” on page 2-26.
To Next Page
Loading...
Need help?
General
