40
3CONFIGURATIO
N TOOLS
DMS-CTC-20111123-0002 v1.0
3.3.1 Access the CLI via Telnet
Requirements
Your computer must be connected to the MediaAccess Gateway.
For more information, see “2.3 Connecting Your Network Devices to the MediaAccess Gateway” on page 20.
For Microsoft Windows 7 and Vista: the Telnet service must be enabled on your computer.
For more information, consult Windows’ help.
Access via a local Telnet Session
Proceed as follows:
1 Open the Command Prompt or Te r m i n a l .
2 Type telnet followed by the IP address of the MediaAccess Gateway (the default IP is 192.168.1.254) or the DNS name
assigned to your MediaAccess Gateway (by default dsldevice.lan):
3 The CLI now prompts you to log in. For more information, see “Login” on page 45.
Remote access
It is also possible start a CLI session from the Internet. For more information, see “3.4 Access From the Internet” on page 48.
telnet 192.168.1.254
To Next Page
Loading...
Need help?
General
