66
5 SHARING CONTE
NT
DMS-CTC-20111123-0002 v1.0
5.5 Safely Removing your USB Storage Device
Introduction
If you just unplug your USB storage device from the MediaAccess Gateway you may loose your data. To avoid this you must
first stop your USB storage device.
Stopping your USB storage device
Proceed as follows
1 Browse to the MediaAccess Gateway GUI.
For more information, see “Accessing the MediaAccess Gateway GUI” on page 33.
2 On the Toolbox menu, click Content Sharing.
3 In the Navigation bar, click Configure.
4 Click Stop.
5 Unplug your USB storage device from the MediaAccess Gateway.
To Next Page
Loading...
Need help?
General
