Toolbox
7.8.1 Share Content Using Network File Server
Your Wireless Gateway supports the Samba function through which you can directly
access the data and media files on your storage device with other users on the
network. When enabled, the USB storage disk appears on the network folders and is
accessible to other devices on the network.
To enable this feature, do the following:
1. On the main menu, click Toolbox > Content Sharing.
2. On the Content Sharing page, click Configure on the upper-right corner of the
screen.
3. If desired, you may modify the Server Name and Server Description. You will
use the server name to access the USB storage device.
4. On the Network File Server section, check the Server Enabled box.
5. Click Apply at the bottom of the screen to save changes.
To Access Shared Files in Windows
1. Open Windows Explorer.
2. Browse for the server name, this is the USB storage device connected to your
Wireless Gateway. The USB storage device is listed under Network folders.
Wireless ADSL2+ Gateway 41
To Next Page
Loading...
Need help?
General
