Technics OTTAVA S SC-C50 User Manual

32
Operations
Using digital audio output
device
You can connect a CD player, etc. with
optical digital audio cable (not supplied) and
play back music.
10BASE
-
T/
100BASE
-
TX
OPT INLAN AUX IN
DIMMER
INFO
AC IN
500mA5V
Optical digital
audio cable
(not supplied)
CD player, etc.
1 Disconnect the AC mains lead.
2 Connect this unit and a CD player etc.
3 Connect the AC mains lead to this unit.
(⇒ 20)
4 Press [
] to turn this unit on.
5 Press [
] repeatedly to select “OPT”.
6 Start playback on the connected device.
Note
• When enjoying video contents with this
function, the video and audio output may not be
synchronised.
• Pressing [
] mutes the sound while playing back.
(To cancel the muting, adjust the volume, press
again or turn the unit to standby.)
• The digital audio input terminal of this unit can
only detect the following linear PCM signals. For
details, refer to the operating instructions of the
connected device.
 Sampling frequency:
32/44.1/48/88.2/96 kHz
 Number of quantisation bits:
16/24 bit

Technics OTTAVA S SC-C50 Specifications

General

Brand	Technics
Model	OTTAVA S SC-C50
Category	Speakers
Language	English