53
(Continued)
General
The unit does not work.
Operations are not done properly.
• One of the unit’s safety devices, etc. may have
been activated.
Press [ ] on the unit to switch the unit to
standby.
• If the unit does not switch to standby, press
[
] on the unit for at least 5 seconds. The
unit is forcibly switched to standby.
Alternatively, disconnect the AC mains lead,
wait for at least 3 minutes, then reconnect it.
Press [ ] on the unit to switch on. (It may take
some time for this unit to be turned on.)
• If the unit still cannot be operated, consult the
dealer.
A “humming” sound can be heard during
playback.
• An AC mains lead of another device or fluorescent
light is near the cables. Turn off other appliances,
or keep them away from the cables of this unit.
• A strong magnetic field near a TV or other device
may adversely affect the audio quality. Keep this
unit away from such a location.
• The speakers may output noise when a device
nearby is emitting powerful radio waves, such as
when a mobile phone is on a call.
No sound.
• Check the volume of this unit and the connected
device.
• Check to see if the cable connections to the input
terminal of this unit and output terminal of the
connected device are incorrect. If this is the case,
turn this unit to standby and reconnect the cables
correctly.
• Check to see if the correct input source is selected.
• Insert the plugs of the cables to be connected all
the way in.
• Playback of multi-channel content is not
supported.
• The digital audio input terminal of this unit can
only detect linear PCM signals. For details, refer to
the operating instructions of the device.
Playback does not start.
• Depending on your environment or connected
devices, it may take some time.
• Check to see if the format of the file is supported.
For supported formats, refer to “File format”.
(⇒ 68)
To Next Page
Loading...
Need help?
General
